Implementing and Operating Cisco Data Center Core Technologies (DCCOR) — Question 171

A storage array must be connected to port ethernet1/10 on a Cisco MDS 9000 Series Switch. In addition, the array must connect using the FCoE protocol and be single-homed. Which configuration meets these requirements?

Answer options

• A. vsan database vlan 101 vsan 101 fcoe vsan 101 interface vfc 10 interface 1/10 switchport mode e fcoe vfc 10
• B. interface vfc 10 switchport mode f bind interface ethernet 1/10 vsan database vsan 101 vlan 101 fcoe vsan 101 vsan 101 interface vfc 10
• C. vlan database vlan 101 vsan vsan 101 fcoe vsan 101 interface vfc 10 interface ethernet1/10 switchport mode trunk bind interface vfc 10 fcoe vsan 101
• D. vlan database vlan 101 fcoe vsan 101 enable interface vfc 10 vsan 101 interface vfc 10 switchport mode fcoe switchport access vlan 101 bind interface ethernet1/10

Correct answer: B

Explanation

Option B is correct because it properly binds the virtual Fibre Channel interface (vfc 10) to the Ethernet port (ethernet 1/10), and configures the necessary VLAN and VSAN settings for FCoE. The other options either misconfigure the binding, use incorrect commands, or do not meet the requirement for the single-homed connection.