HPE Aruba Certified Campus Access Professional (ACAP) — Question 28

In which scenario do Aruba 2930M Series switches, but not Aruba 2930F Series switches, meet the needs for an upgrade of the wired access layer?

Answer options

• A. Each switch must support 48 1Gbps edge ports, and the uplinks must be redundant as well as provide no worse than 10:1 oversubscription.
• B. The customer requires enhanced redundancy at the access layer and wants to ensure that each switch can continue to operate even if a power supply fails.
• C. The customer requires switches in the same closet to connect together into a single virtual switch that is managed and operates as a single device.
• D. Each switch must support mostly non-PoE devices, but also at most four Aruba AP-345s which require PoE+ to support the full requirements for the customer scenario.

Correct answer: A

Explanation

The correct answer is A because the Aruba 2930M Series switches are specifically designed to support higher port densities and redundancy standards, which is necessary for the customer's requirement of 48 1Gbps edge ports with a 10:1 oversubscription ratio. Options B, C, and D do not highlight the specific capabilities of the 2930M Series compared to the 2930F Series regarding port density and uplink requirements.