Dell EMC Specialist – Implementation Engineer, PS Series — Question 3

When an RS-232 serial cable is connected between a service laptop and SC Series hardware, which parameters need to be selected?

Answer options

• A. Baud Rate = 9600, Parity = None Data Bits = 8, Stop Bits =1, Flow Control = XON/XOFF
• B. Baud Rate = 115200, Parity = None Data Bits = 8, Stop Bits = 1, Flow Control = XON/XOFF
• C. Baud Rate = 115200, Parity =None Data Bits = 8, Stop Bits = 1, Flow Control = None
• D. Baud Rate = 115200, Parity = Even Data Bits = 8, Stop Bits = 1, Flow Control = XON/XOFF

Correct answer: A

Explanation

The correct answer is A because the specific settings for RS-232 communication with SC Series hardware are required to be Baud Rate = 9600, Parity = None, Data Bits = 8, Stop Bits = 1, and Flow Control = XON/XOFF. Options B, C, and D do not meet the necessary Baud Rate or Parity requirements for this configuration.