Implementing and Operating Cisco Data Center Core Technologies (DCCOR) — Question 364

An engineer is implementing VSANs on a Cisco MDS 9000 Series Switch with a native Fibre Channel. The deployment must meet these requirements:
• The host on port fc1/1 must be assigned to VSAN 10.
• The port channel 10 ISL must pass multiple VSANs, including VSAN 10.

Which configuration set meets these requirements?

Answer options

• A. Activate VSAN 10 in the vFC interface. Associate VSAN 10 to interface vfc 1/1. Enable vsan F-port-channel-trunk on the ISL. Set encapsulation EISL on the switch port.
• B. Create VSAN 10 in the VSAN database. Bind VSAN 10 to interface fc1/1 in the VSAN database. Enable VSAN trunking on the ISL. Allow VSAN 10 on the ISL.
• C. Configure VSAN 10 in the interface configuration. Attach VSAN 10 to the VSAN database. Enable VSAN trunking on fc1/1. Filter all VSAN on the ISL.
• D. Disable VSAN 1 in the VSAN database. Assign VSAN 10 to the ISL. Enable VSAN trunking on the port channel members. Permit VSAN 10 in the FLOGI database.

Correct answer: B

Explanation

Option B is correct because it involves creating VSAN 10 in the VSAN database, binding it to port fc1/1, enabling trunking on the ISL, and allowing VSAN 10, which meets all requirements. The other options either do not correctly configure the ISL for multiple VSANs or misconfigure the necessary bindings and settings.