Implementing Cisco Wireless Network Fundamentals (WIFUND, legacy) — Question 115

A controller is connected to a Cisco Catalyst switch. The switch port configuration looks like this: interface GigabitEthernet 1/0/10 switchport switchport trunk encapsulation dot1q switchport trunk allowed vlan 1,20,30,50 switchport trunk native vlan 20 switchport mode trunk
Which controller CLI command assigns its management interface to the native VLAN interface of the Cisco Catalyst switch?

Answer options

• A. config interface vlan management 20
• B. config interface vlan management 0
• C. config interface vlan management 1
• D. config interface vlan management 30

Correct answer: B

Explanation

The native VLAN for the switch port is configured as VLAN 20. However, for the management interface to be correctly assigned to the native VLAN, it must be set to VLAN 0, which is the default native VLAN setting. Hence, option B is correct, while options A, C, and D do not correspond to the native VLAN setting.